The last machine born in Fadis is the Sincro Multipla Aqua Jet air texturing machine. Starting from FDY- FOY yarns, either PA or PES or PP, any combination can be created, also with elastane component, for different end uses such as active wear, sportswear, underwear, knitted fabrics, carpet backing, outdoor and upholstery.
A uniqueness of the Sincro Multipla Aqua Jet is the presence of “Tens Control™”, an online tension sensor placed before the take up that assures a constant, automatic control and adjustment of the take-up tension, without any intervention from the operator, important for a better performance of the bobbin in the next production step and essential for the proper preparation of soft packages, very often required.
A very delicate aspect to consider in the air texturing process is the yarn path angle, as it greatly affects the yarn quality. The Sincro Multipla Aqua Jet has therefore been studied in a way that allows the core and the effect yarns entering in the air texturing “wet box” without any angle to guarantee a perfect air texturing result and consequent higher yarn quality. The same straight path is there between the air texturizing jet box and the master roller, and between the master roller and the drawing/stabilizing roller.
Depending on the numbers of plies to be intermingled and feed bobbin size, the machine can be supplied either with upper creel or with a separate creel with same “Tens Control™” online tension device used to control the take up bobbin tension.